Instant video measuring software

Chapter 3 Measurement settings

Before measuring the object, the measurement template must be set and saved before entering continuous measurement for automated measurement. After measuring and recording the data, you can use the statistical analysis to analyze and process the data obtained by continuous measurement.

Description

1 Menu：Menu: includes screenshots, element display size, color, default tolerance, calibration tool, hardware settings, auxiliary tools, data export.

2 Image display area：Image showing the Object.

3 Hardware settings toolbar：Quickly set camera, light and motor

4 Tooltips：Short step-by-step instructions for using the selected tool

5 Selection tool：Select elements for adjustment

6 Font size tool：Change the display font size

7 Element View Tool

8 View display tool

9 Back to main menu：Return to main menu

10 Open template：Open a saved template

11 Tool panel：template tool

12 New：Create a new template

13 Register：Register template image

14 Tolerance list button：Click to show a list window of all tolerances

15 Save ：Save template

16 Measurement：Enter continuous measurement

3.1 Lighting and Focus

3.1.1 Lighting settings

When the meter is powered on, the illumination intensity is a default value set by the software. After placing the object to be measured on the stage, enter the measurement setting. At this time, the Image display area can hardly show the outline of the workpiece, as shown in Figure 3-1.

Figure 3-1

Use the light control under the menu to adjust the light intensity until the measurement object can be clearly displayed on the screen.

1. Click the menu to pop up the drop-down box.

2.Click Hardware Settings à light control.

3. Adjust the brightness according to the type of light source, you can drag the slider or click the small arrow to adjust.

You can also directly click the button on the upper toolbar to directly pop up the above dialog box.

3.1.2 Focus

After setting the brightness of the light, the focus can be adjusted to make the profile of the workpiece clear.

Click the motor button , the following window will be displayed in the lower right corner of the screen display area.

Manual focus：Click the up and down buttons or

drag the slider.

Auto focus：Click the Focus button.

3.1.3 Enlarge image

You can enlarge the image.

Step 1: Move the mouse to the area to be enlarged.

Step 2: Slide the mouse wheel forward for enlarged display（Figure 3-2）.Slide the mouse wheel backward to zoom out the enlarged image（Figure 3-3）.

Figure 3-2                                                  Figure 3-3